Atlia guide
Airbnb Repairs in San Diego: Who Approves What
Who approves Airbnb repairs in San Diego? The owner sets the rules and dollar limits in writing, and the manager coordinates the work, billed at cost.

The owner decides what gets approved, and the manager coordinates the work. That split is the whole answer, and it only works if it is written down before the first leak, dead outlet or broken lock shows up. Without a written rule, every repair becomes a text thread at the worst possible time.
This guide shows how to sort preventive work from urgent work, how to set a dollar approval threshold and a separate emergency limit, what you should see before and after any job, and how repair billing should read on your statement. Atlia is a full-service short-term rental management company with a flat 10% fee and a staffed San Diego base. It coordinates maintenance for owners, and repairs and supplies are passed through at cost.
The short answer: the owner sets the rules, the manager coordinates the work
You own the property, so you own the spending decisions. A manager runs the process inside the limits you set. They spot the problem, get it scoped, ask for your approval when the job is above your line, line up the work, and report back when it is done.
Three things belong in writing, and the management agreement is the right place for them. First, a dollar amount below which routine repairs can go ahead without asking you. Second, a separate, higher emergency limit for problems that cannot wait. Third, what the manager must send you before and after each job.
If any of those three is missing, you are approving repairs by improvisation. That is how owners end up either buried in notifications or surprised by an invoice.
Preventive vs urgent repairs: how to sort them between and during stays
Preventive work is scheduled, budgeted and boring. Urgent work is guest-impacting, safety-related or likely to get worse if left alone. Sort every issue into one of those two buckets first, because they follow different approval paths.
Preventive tasks like HVAC servicing, periodic inspections and seasonal maintenance belong on a recurring calendar and a yearly budget. Approve them once as a plan instead of one at a time. Cosmetic or nonessential fixes, like a scuffed baseboard or a tired lamp shade, can wait for a longer gap between bookings.
Between stays, the turnover window is your inspection window. A fault that would affect the next guest, such as a toilet that runs, a burnt-out appliance or a door that does not latch, should be caught and handled before check-in. Our guide to what happens between stays covers how that window gets used.
During a stay, the bar goes up. Anything that threatens safety, security or essential services (no hot water, a failed lock, a leak) is urgent. Everything else gets logged and fixed after checkout, not by interrupting a guest.
How to set an approval threshold (and a separate emergency limit)
Put two numbers in the agreement: a routine-repair threshold and an emergency cap. Below the routine threshold, the manager can authorize work without asking. Anything larger and non-urgent comes to you first.
Pick the routine number by asking what you would approve without a second thought. If a $150 faucet cartridge would never make you blink, a $150 threshold removes a pointless approval round. If you want to see everything above $250, say so.
The emergency cap is a different instrument. It covers problems that threaten safety, security or essential services, or that would cause more damage if they waited for your reply. Set it higher than the routine threshold, and require prompt notice and documentation when it is used. Owners who are out of the area or hard to reach benefit most from a clear emergency cap, since the alternative is a burst pipe waiting on a voicemail. If you are not local, managing a San Diego Airbnb from out of state goes deeper on how to set up that kind of arrangement.
Write both numbers as dollars per job, not vague language like "reasonable." Decide, too, whether the threshold applies per repair or per property per month, so a series of small invoices cannot quietly add up.
What you should see before and after any repair
Before any job above your threshold, you should see four things: what is wrong, what the proposed fix is, what it will cost, and whether it is urgent or can wait. If you cannot answer "why now?" from the message, ask.
After the job, you should see three things: confirmation the work was completed, the final invoice, and some evidence that the problem is actually fixed. A completion check closes the loop. Without it, a repair is just a charge on your statement.
Keep a file of work orders, approvals, invoices and completion checks for every job. It is your record if a number looks off later, and it makes the yearly picture visible: which systems keep failing, which repairs recur, and where preventive spending would have saved money.
Atlia's owner reporting works this way. Approvals are clear and reporting is transparent, so you stay in control while the daily operational work stays off your plate.
Pass-through at cost: how repair billing should read on your statement
Repairs should appear on your statement at what they actually cost, as their own line items, separate from the management fee. No markup, and no bundled "maintenance fee" that hides the real number.
With Atlia, the management fee is a flat 10%, and repairs and supplies are passed through at cost. The fee pays for coordinating the work, not for taking a cut of it. That keeps the incentives simple: nobody earns more because a repair got bigger.
When you review a statement, check that each repair line matches an approved work order and an invoice. The amount, the date and the description should all trace back to something you saw before or after the job. If a line cannot be traced, that is a question to ask, and it is a fair one.
The same logic applies to supplies. Restocking should show as what it cost, not as a rolled-up charge you cannot audit.
Where the local-contact role fits when something breaks mid-stay
A mid-stay problem often arrives as a guest complaint, which is a different channel from a repair request. San Diego's short-term rental rules require a local contact who responds to a reported complaint in person or by phone within one hour. Responding is not the same as repairing. The contact's job inside that window is to answer and act, while the repair itself follows your approval rules.
Atlia's staffed San Diego base covers the local-contact role and responds in person or by phone inside the one-hour window, included in the management rate. The designation itself is yours to make as the host. Once someone is on the problem, the maintenance coordination follows the structure you wrote down. If it is an emergency under your cap, work can proceed with prompt notice to you. If it is not, it waits for your approval or the next gap between bookings.
This is the practical reason to separate the two numbers. The one-hour response happens on its own clock. The spending decision follows your limits.
A checklist to put in writing before the first repair comes up
Copy this into your management agreement or an addendum, and fill in the blanks with your own numbers:
Routine threshold: the dollar amount per job the manager can approve without asking you.
Emergency cap: a separate, higher amount for safety, security, essential-service or damage-prevention problems, with notice to you as soon as practical.
Preventive calendar: which recurring tasks are pre-approved (HVAC servicing, inspections, seasonal work) and when they happen.
Before the job: the problem, the proposed fix, the cost, and urgent or can-wait.
After the job: completion confirmation, the final invoice and proof the fix held.
Billing: repairs and supplies as separate line items at cost, each tied to a work order.
Records: work orders, approvals, invoices and completion checks kept on file and available to you.
Cosmetic work: held for a longer gap between stays unless you say otherwise.
If you are comparing managers, ask each one how they handle every line on this list. The answers show quickly who has a process and who has a promise. Our six questions for comparing proposals is a useful companion.
Write the two numbers down before the first repair
Good maintenance comes down to decisions made in advance: a routine threshold, an emergency cap, a preventive calendar, and a clear trail before and after every job. When those are written down, repairs stop being a source of surprise. If you want a manager that coordinates maintenance under your rules, passes repairs and supplies through at cost, and covers the local-contact role from a staffed San Diego base, reach out to Atlia and bring your own threshold numbers to the first conversation.
Frequently asked questions
Questions owners ask
Who approves repairs at a short-term rental in San Diego?
The owner. A written management agreement sets a dollar threshold under which the manager can authorize routine work, and anything larger and non-urgent comes to you first. A separate emergency cap covers urgent problems. Atlia coordinates maintenance within the limits you set and keeps you informed through owner reporting and clear approvals.
What is a reasonable repair approval threshold for an Airbnb?
The figure you would approve without hesitation. Write it in dollars, decide whether it applies per repair or per property per month, and keep it separate from a higher emergency cap for safety, security or essential-service problems. Put both numbers in the management agreement.
How should repairs be billed by an Airbnb manager?
As separate line items at actual cost, each traceable to an approved work order and an invoice, and distinct from the management fee. Atlia charges a flat 10% management fee and passes repairs and supplies through at cost, so the statement shows what the work actually cost.
What should I see after a repair is finished?
Confirmation that the work was completed, the final invoice, and evidence the problem is fixed. Keep work orders, approvals, invoices and completion checks on file. That record lets you match every charge on your statement to a job and spot recurring problems that preventive work could address.